Instructions:
In the pharmaceutical plants , some technics
processes refer to storage and preparation . Such as , storage of purified
water comes to storage tank , WFI comes to WFI storage tank etc.
Learning about this system , SINOPHAM supplies
design ,manufacture , instillation , measure and validation supporting service
for customers .
To reach special requirements of biological engineering equipment , technics vessel must have good structure complying with requirements of pharmaceutical and sanitation .
Features:
Machining as the pressure vessel quality
assurance system .
Chemical stability of material ---undissolved
, innoxious , stainless steel 304, 316L.
Surface treatment ---- mechanical and
electro-polishing for the contact surface with media .
Connection mode ---- argon protection
welding.
Structure ---- aseptic and sanitation.
Seal ---- a good seal system , should regarde
to the seal level , working pressure , working temperature , anti-cavitation ,
sterilization ,clean , passivation .
Slope : solution drain by itself gravity .
Diameter and length ratio of nozzle and dead
leg of pipeline ----if the length and diameter ratio is big , matters tend to
remain , microorganisms are prone to grow up .
Easy connection --- CIP and SIP connection
easily .
Technical
Parameters:
The requirements for the material and surface
treatment are same as vessel basically, connection with argon protection
welding and sanitation clamp joint . Inner circular arc angles of tube and
fittings both comply with the requirements of biological engineering equipment
.According to the different requirements of technics , attachments may
include:
Chemical stability of material ---undissolved
, innoxious , stainless steel 304, 316L.
Spray device ---- coverage rate is 100%,
to assure physical appearance and chemical property of media are same in
different places.
Meters detection ----- level meter ,
temperature meter , PH , conductivity meter are using for the supervision
physics and chemical state of medias in vessel.
Manhole ---a passage for clean and repair
person.
Sight glass---- to assure operator check the
inner state of equipment.
Weightometer--- to weigh for liquid medicine
.
Jacket ---- to regulate the inner temperature
of vessel , satisfy technics requires for the temperature state .
Insulation ---- according to the requirements
of technics or comparing with ambient , reduce energy consumption , prevent
operator from injuring , should have the insulation measure . The
insulation material not contain asbestos and chloride .
Air filter or clean nitrogen supply system
--- to prevent uncondensable air coming into vessel , pressure inside and
outside of vessel are same .
Pump & valves ---type is very crucial
when using largely .
Consideration for requirements of CIP and SIP
. For example , 1. for the mixing tank of liquid medicine , using
pneumatic diaphragm tank bottom valve . 2. WFI using KLH sanitation pump .
Churn-dasher ---- stir for liquid medicine
adequately .
