SXP32 Semi-Automatic Bottle Washing Machine

SXP32 Semi-Automatic Bottle Washing Machine

Application:

SXP32 Semi-Automatic Bottle Washing Machine Mainly used for liquor, honey, wine, beverages, spices and other liquid manufacturing industry, the packaging bottle cleaning, the bottle can be inside and outside the surface of the dust, stains and other general dirt spray, cleaning. The machine can be used alone or in combination with other liquid packaging machinery.

Technical Parameters:

1. Max production capacity: 1500 Bottle/ hour

2. Applicable bottle line: for 100ml-1000ml Most of the square bottles, round bottles and some shaped bottles, according to the bottle made

3. Motor power: 0.75kw

4. Water consumption: ≤0.03m3 / h

5. Consumption point: ≤ 0.75kwh

6. Dimensions: 1000 × 1000 × 1350

7. Quality: 120kg

8. Can be customized according to the bottle

Working Principle:

The machine mainly by the rack, water tray, shield, water and transmission habits and other components. (As shown in the figure) The power of the motor output by the triangular pulley drive, driven worm gear box, the worm gear box slowdown, the output power by the bevel gear drive, driven spindle rotation, the spindle is driven on it The turntable turns. So that the bottles on the plate to turn the rotation.

Work, by manually washing the bottle to be washed on the turntable bottle basket, with the slow rotation of the turntable gradually into the spray area. The machine uses high-pressure water inside and outside the rinse, can effectively wash away the bottle, the wall of the various dirt. After a period of time after the spray, the bottle gradually out of the spray area. Still by the artificial bottle removed, into the bottle machine into the next process.

Working Conditions and Environmental Requirements:

1. Power supply: The machine uses power 220V ± 10%, frequency 50HZ

2. Spray water source: the pressure is not less than 0.15Mpa, the flow is not less than 0.03m3 / h

Installation and Commissioning:

The installation of the machine without underground structure, just placed in the plane, hard ground can be.

1. Power supply: Connect the power supply. (Note: pay attention to waterproof, to ensure safety.)

2. Waterway installation:

A. Attach the waterway system to the water source such as tap water with a 1 "hose in the inlet tube at the top of the equipment. Note: The water source should meet the pressure and flow requirements of the unit. 1 "a valve, can facilitate the spray water pressure and flow adjustment or cut off the water.

B. With 2 2 "hose installed in the water inlet of the water tray, the water will be sprayed after the discharge (Note: the exclusion of water after purification of the machine can be recycled).

3. After installation, you can test machine. Turn on the power, so that the turntable clockwise (according to custom and production needs) rotation; connected to the water, into the bottle to be washed, adjust the pressure of the water to achieve a satisfactory flushing effect.

Lubrication, Maintenance and Maintenance:

1. Lubrication:

A. Spindle two rolling bearings Application Calcium sodium grease Artificial replacement every six months, the replacement should be removed old grease, re-fill the new grease.

B. open transmission bevel gear vice, the application of calcium and its grease lubrication, artificial once a month.

C. Reducer and motor lubrication

2. Maintenance and maintenance:

A. Each class before starting, should be empty for 1 minute, check no exception before the normal production.

B. The end of each class work, the equipment should be scrubbed clean, keep clean.

C. should always check the gearbox oil level, if necessary, to add or replace.

D. Maintenance of motor and gearbox, according to their requirements.

Common Faults and Exclusion: