AUTOCLAVE STEAM STERILIZER PREMIUM MODEL

AUTOCLAVE STEAM STERILIZER PREMIUM MODEL

Instructions:

An Autoclave is a device to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C or more, typically for 15-20 minutes.

In its most basic form the autoclave is a pressure cooker. Water is heated in a pressurized environment to create steam. Using pressure makes it possible to heat to higher temperatures with less energy. Autoclaves are usually made of steel and have various configurations for removing air prior to pressurization. Downward displacement autoclaves use gravity to remove air. Steam pulsing autoclaves use pulses of steam along with pressurizing and depressurizing to reach optimum pressure. Vacuum pump autoclaves suck air out for pressurization. Super atmospheric autoclaves are a combination of steam pulsing and vacuum pump techniques. Autoclaves are widely used in microbiology, medicine, tattooing, body piercing, veterinary science, mycology, dentistry, chiropody and prosthetic fabrication.

Application:

• For use in Microbiology, QC & Research laboratory – Pharma Industry
• Double wall type design however has inner chamber for steam, outer as cover.
• Choose from 2 models Internal Reservoir or External Reservoir.
• Fully Automatic operation; cycle begins by press of the START button.
• Initial air purging cycle; at the beginning air is automatically removed from the chamber.
• Microprocessor based Digital Temperature Indicator Controller Controls temperature / pressure precisely at set value.
• Temperature Sensor: PT – 100.
• In built digital timer; timer can be adjusted as per sterilization load requirement, 1 to 99minutes.
• Automatic steam exhaust at the end of cycle.
• Low water level heater safeguard.
• Safety high pressure release valve.
• Safety high temperature cut off.
• Working chamber made of stainless steel LM 304 grade.
• Outer cover made of Mild Steel for Standard model duly powder coated and stainless steel 1mm thick for GMP model, however, inner frame structure of solid chrome plated finish.
• Lid, flange & bottom sheet also made of stainless steel SS 304. All joints argon welded.
• Silicon gasket. Heavy duty industrial flange heater.
• Pressure range: 15 to 30 PSI, factory set at 15 PSI, 15 minutes ster. Cycle time.
• Temperature Range: 121°C to 134°C.
• Temperature Resolution: 0.1°C / Temperature Accuracy: ±0.5°C.
• Pressure gauge 0-50 PSI, safety spring loaded pressure valve, steam release valve.
• Hydraulically tested at 75PSI.
• Additional Safety
  i) Pressure Switch made in Europe, CE certified for additional safety. Factory set at 30PSI.
  ii) Vacuum breaker cum lid locking arrangement for locking lid above 80degC.
  iii) Multiple micro-switches to sense lid closure, lid proper latching such that heating won't start if parameters not satisfied.
• Electrical: 230V / 15A / 50 Hz.
• Calibration certificate by ERTL – Mumbai with traceability to NPL – New Delhi.
• Provided with DQ, IQ, OQ, documentation

Optional Accessories offered by Premium Model:

• Basket
• Printer Interface (1 Temp + 1 Pressure printing or 3 Temp + 1 Pressure Printing).
• High Temp Safety Controller.
• Fo printing.
• PC software 21CFR Part 11 compliant.
• Electrical actuator to ensure lid doesn't open under pressure.
• Electromagnetic door lock for locking lid under pressure. Imported from Europe, patented design, CE marked. Can keep door locked upto 300 Newton pressure.
• PLC based system with 3.5” Touch Screen display:
  i)Pressure Pulsing: both +ve and –ve pressure pulsing is programmable.
  ii)Assisted Air Cooling: for quick cooling of chamber.
  iii)Vacuum Pump system for automatic pre/post vacuuming with pulsing.
  iv)Drying cycle.
  v)Automatic Water Fill – automatic water filling in reservoir

Technical Parameters: