TRL-0.5S Experimental Lyophilizer

TRL-0.5S experimental lyophilizer using wall-mounted design,to avoid contamination of machine components to clean rooms and products. Oven door and the cold trap doors are made of imported transparent PMMA, to facilitate the process of freeze-drying observed at any time. Number of shelves can be customized to improve the utilization of lyophilized effective area.It is suitable to lyophilization of a variety of formulations and material. Advantage: 1. Experimental lyophilizer used in clean room professionally, to avoid contamination of machine components for clean rooms and products; 2. Horizontal and cylindrical cold trap, external coil, catching large amount of water, frosting evenly; 3. The number of shelves can be customized; 4. Automatic tamponade, adjustable tamponade pressure; 5. Hot gas defrosting compressor; Model TRL-0.1 TRL-0.5 TRL-0.5E TRL-0.5S   Chamber   Material Imported stainless steel AISI 316L Imported stainless steel AISI 316L Imported stainless steel ANSI 316L Imported stainless steel ANSI 316L   Shelves 1 3(Useable)+1Thermal equilibrium plate Customizable 1/2/3/4/5/6 Customizable 1/2/3/4/5/6   Shelves size (mm) 360（Length) *280（Width）*  25(Thickness) 560（Length）* 300（Width）*16(Thickness) 500 (Length)*270 (Width)*10 (Thickness) 500 (Length)*270 (Width)*10 (Thickness)   Shelve usable area 0.1 m2 0.5m2 0.135/0.27/0.405/0.54/0.675/0.81m2 0.135/0.27/0.405/0.54/0.675/0.81m2   Shelves spacing 100mm 100mm 312/156/100.6/73/56.4/45.3mm 312/156/100.6/73/56.4/45.3mm   Shelf temperature range -55℃  - +80℃ -70℃  - +80℃ -70℃- +80℃ -70℃- +80℃   Shelves cooling rate: from +20℃  to -40℃ ≦60 min（No load） ≦30 min（No load） ≦30 min（No load） ≦30 min（No load）   Shelves heating rate: from +20℃  to -40℃ ≦60min ≦60min ≦60 min（No load） ≦60 min（No load）   Temperature uniformity ±1℃ ±1℃ ±1℃  ±1℃      Front door (Rectangle) PMMA PMMA PMMA PMMA     Locking Manual locking Manual locking Manual locking Manual locking   Condenser In chamber   Independent Independent Independent   Material Imported stainless steel AISI 316L，with coils inside Imported stainless steel AISI 316L，with coils inside Imported stainless steel ANSI 316L; with external coil Imported stainless steel ANSI 316L; with external coil   Condenser icing capacity 2Kg 8 Kg 10 Kg 10 Kg     Lowest temperature -65℃ -85℃ -85℃ -85℃   Condenser cooling rate: From +20℃ to -40℃ ≦30 min ≦30 min ≦30 min ≦30 min     Defrosting mode   Normal temperature Hot gas of  Compressor Hot gas of  Compressor Hot gas of  Compressor   Front door PMMA PMMA PMMA PMMA    Hydraulic  system     Hydraulic station  None BREVINI Placed below chamber